74AUP1G79GM,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 309MHz |
| Propagation Delay | 17.3 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 2 ns |
| Family | AUP/ULP/V |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 0.8pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AUP1G79GM,132 Overview
In the form of 6-XFDFN, it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 0.8V~3.6Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74AUP series. You should not exceed 309MHzin its output frequency. A total of 6 terminations have been made. It is a member of the 74AUP1G79 family. A voltage of 1.8V is used to power it. A 0.8pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the AUP/ULP/Vfamily of devices. There is an electronic part mounted in the way of Surface Mount. There are 6pins on it. It has a clock edge trigger type of Positive Edge. There are 1bits in its design. Normally, the supply voltage (Vsup) should be above 0.8V. The superior flexibility is achieved through the use of 1 circuits. There is a consumption of 500nAof quiescent current from it.
74AUP1G79GM,132 Features
Tape & Reel (TR) package
74AUP series
6 pins
1 Bits
74AUP1G79GM,132 Applications
There are a lot of Nexperia USA Inc. 74AUP1G79GM,132 Flip Flops applications.
- Bus hold
- Parallel data storage
- Reduced system switching noise
- Frequency Dividers
- Data storage
- Cold spare funcion
- Computers
- Counters
- Memory
- Single Up Count-Control Line
