74AUP2G07FW3-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Supplier Device Package | X2-DFN0910-6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Series | 74AUP |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 0.8V~3.6V |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Propagation Delay | 19.8 ns |
| Turn On Delay Time | 12.8 ns |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | - 4mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Low Level Output Current | 4mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 2 |
| Schmitt Trigger Input | Yes |
| Height | 280μm |
| Length | 900μm |
| Width | 1mm |
| RoHS Status | ROHS3 Compliant |
74AUP2G07FW3-7 Overview
Logical driver uses a neat 6-XFDFN package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is - 4mA. Logical driver can deal with Open Drain output (s). All of the 2 elements are put into use. Digital buffer is one of the 74AUP series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 6 pins. The bus transceiver employs 1 bits for each element. 2 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 4mA to its low level. Voltage used to run voltage buffer should be 800mV at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 2 lines. Because of its 2 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be X2-DFN0910-6. Does the electronic component support schmitt trigger input? Yes. Bus transceiver operates on 500nA.
74AUP2G07FW3-7 Features
High Level Output: 4mA
74AUP2G07FW3-7 Applications
There are a lot of Diodes Incorporated 74AUP2G07FW3-7 Buffers & Transceivers applications.
- IPTV front end
- Car alarm systems
- High-speed computer links
- Switching system
- Thermal management
- Televisions
- Sensor reporting
- VoIP phones
- Switches/bridges/routers/servers
- Wireless projection application for conferences and business talks
