74AUP2G79GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AUP2G79 |
| JESD-30 Code | R-PDSO-N8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Clock Frequency | 309MHz |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 0.6pF |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
74AUP2G79GT,115 Overview
The flip flop is packaged in a case of 8-XFDFN. It is contained within the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 0.8V~3.6V volts. A temperature of -40°C~125°C TAis used in the operation. D-Typeis the type of this D latch. This type of FPGA is a part of the 74AUP series. A frequency of 309MHzshould be the maximum output frequency. In total, it contains 2 elements. Despite external influences, it consumes 500nAof quiescent current. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74AUP2G79family make up this object. The power source is powered by 1.2V. The input capacitance of this T flip flop is 0.6pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the AUP/ULP/Vfamily of D flip flop. There is a 3.6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 0.8V.
74AUP2G79GT,115 Features
Tape & Reel (TR) package
74AUP series
74AUP2G79GT,115 Applications
There are a lot of Nexperia USA Inc. 74AUP2G79GT,115 Flip Flops applications.
- Load Control
- Computers
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Clock pulse
- Buffered Clock
- Shift registers
- Communications
- ESD performance
- Dynamic threshold performance
