74AVC16374DGG-Q10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | 74AVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Additional Feature | SEATED-HGT NOM |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AVC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 350MHz |
| Propagation Delay | 3.3 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 3.1 ns |
| Family | AVC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.3ns @ 3.3V, 30pF |
| Screening Level | AEC-Q100 |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 16 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74AVC16374DGG-Q10J Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 1.2V~3.6V volts. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74AVCseries of FPGAs. Its output frequency should not exceed 350MHz. The element count is 2 . The number of terminations is 48. The 74AVC16374 family contains this object. The D flip flop is powered by a voltage of 1.5V . Input capacitance of this device is 5pF farads. It is a member of the AVCfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. It has a clock edge trigger type of Positive Edge. Vsup reaches its maximum value at 3.6V. The flip flop has 2embedded ports. In order for the chip to function, it has 16output lines. There is 40μA quiescent current consumption by it. It is also characterized by SEATED-HGT NOM.
74AVC16374DGG-Q10J Features
Tape & Reel (TR) package
74AVC series
48 pins
74AVC16374DGG-Q10J Applications
There are a lot of Nexperia USA Inc. 74AVC16374DGG-Q10J Flip Flops applications.
- Supports Live Insertion
- Frequency Dividers
- Parallel data storage
- Digital electronics systems
- Control circuits
- EMI reduction circuitry
- Matched Rise and Fall
- Dynamic threshold performance
- Asynchronous counter
- Balanced Propagation Delays
