banner_page

74AVC16374DGG,112

1.2V~3.6V 350MHz 16 Bit D-Type Flip Flop 74AVC16374 48 Pins 40μA 74AVC Series 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74AVC16374DGG,112
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 824
  • Description: 1.2V~3.6V 350MHz 16 Bit D-Type Flip Flop 74AVC16374 48 Pins 40μA 74AVC Series 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Max Supply Voltage 3.6V
Min Supply Voltage 1.4V
Number of Bits 16
Clock Frequency 350MHz
Propagation Delay 9.4 ns
Quiescent Current 200nA
Turn On Delay Time 1.3 ns
Logic Function D-Type
Current - Quiescent (Iq) 40μA
Current - Output High, Low 12mA 12mA
Number of Bits per Element 8
Max Propagation Delay @ V, Max CL 3.3ns @ 3.3V, 30pF
Trigger Type Positive Edge
High Level Output Current -12mA
Input Capacitance 5pF
Low Level Output Current 12mA
Clock Edge Trigger Type Positive Edge
Radiation Hardening No
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Supplier Device Package 48-TSSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2013
Series 74AVC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type D-Type
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 1.2V~3.6V
Frequency 350MHz
Base Part Number 74AVC16374
Function Standard
Output Type Tri-State, Non-Inverted
Number of Elements 2
Polarity Non-Inverting

74AVC16374DGG,112 Overview


It is packaged in the way of 48-TFSOP (0.240, 6.10mm Width). Package Tubeembeds it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 1.2V~3.6Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74AVC series. You should not exceed 350MHzin the output frequency of the device. In total, there are 2 elements. This process consumes 40μA quiescents. You can search similar parts based on 74AVC16374. The input capacitance of this JK flip flopis 5pF farads. There is an electronic component mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. 16bits are used in its design. 200nAquiescent current consumed. High level output current is set to -12mA. In the low level output current setting, the current is set to 12mA. There should be a temperature below 85°Cduring operation. Ideally, the operating temperature should be greater than -40°C. Despite its minimal supply voltage of 1.4V, it is capable of operating. It supports a maximum supply voltage of 3.6V volts. It is possible to achieve 350MHz frequencies.

74AVC16374DGG,112 Features


Tube package
74AVC series
48 pins
16 Bits

74AVC16374DGG,112 Applications


There are a lot of Nexperia USA Inc. 74AVC16374DGG,112 Flip Flops applications.

  • Supports Live Insertion
  • Convert a momentary switch to a toggle switch
  • Memory
  • Buffer registers
  • Load Control
  • Instrumentation
  • Pattern generators
  • Computers
  • Automotive
  • Event Detectors

Write a review

Note: HTML is not translated!
    Bad           Good