74AVC16T245DGV,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74AVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AVC16T245 |
| Pin Count | 48 |
| Output Type | Tri-State, Non-Inverted |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3 ns |
| Quiescent Current | 185μA |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Channels per Circuit | 8 |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AVC16T245DGV,112 Overview
Level translators is integrated into the 48-TFSOP (0.173, 4.40mm Width) package.Tube is the packaging method.In this configuration, the output is set to Tri-State, Non-Inverted.Its translator type is Voltage Level.A Surface Mount mounting method has been used for this electronic part.Bidirectional is the Channel type of this electrical device.Level translators operates at -40°C~125°C TA.2 circuits are used to achieve its superior flexibility.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A series of related parts can be derived from the base part number 74AVC16T245.This device is powered by a supply voltage of 1.2V which is applied to it.There are 48 pins on this device.This is a device from the 74AVC series.Level translators has 48 pins.16 Bits are used in the design of this electronic part.3.6V is the maximum supply voltage it can handle.In order for the machine to operate, the supply voltage must be 800mV.In the VCCA, the supply rail is set to 0.8V~3.6V.Level translators is configured from 0.8V~3.6V for the VCCB supply rail.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Logic ICs it uses are of the BUS TRANSCEIVER type.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.This electronic device is categorized as a AVC electronic device.Level translators consumes 185μA quiescent current and is not affected by external factors.
74AVC16T245DGV,112 Features
48-TFSOP (0.173, 4.40mm Width) package
2 circuits
48 pin count
74AVC series
48 pins
74AVC16T245DGV,112 Applications
There are a lot of Nexperia USA Inc. 74AVC16T245DGV,112 voltage translators & level shifters applications.
- UART
- Desktop PC
- One Fabrication Site
- Personal Electronics
- One Assembly
- Power-sensitive applications
- Controlled Baseline
- Data and Clock Transmission Over Backplane
- Extended Product-Change Notification
- Test Site
