74AVC2T45GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74AVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVC2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 23μA |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 2.4 ns |
| Quiescent Current | 23μA |
| Turn On Delay Time | 11.8 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVC2T45GT,115 Overview
The 8-XFDFN package contains it.Packaged in the way of Tape & Reel (TR).In its configuration, Tri-State, Non-Inverted is used as the output.Level translators has the translator type Voltage Level.Level translators is mounted according to the Surface Mount method.In this electrical device, the Channel type is Bidirectional.A temperature of -40°C~125°C TA is used for operation.The circuit's superior flexibility is achieved through the use of 1 circuits.Transmission lines are terminated using 8 terminations.Level translators is possible to determine Level translatorss related parts using the base part number 74AVC2T45.In order to power the device, a voltage supply of 1.1V is required.There are 8 pins on this device.This device belongs to the 74AVC series.There are 8 pins on it.Electronic parts with 2 bits are designed for this application.There is a maximum voltage of 3.6V supported.This device requires a minimum voltage of 800mV.There is a configuration of 0.8V~3.6V for the VCCA supply rail.VCCB is configured with a supply rail that starts at 0.8V~3.6V.The way of mounting this electronic part is Surface Mount.There are a total of 2 channels.A BUS TRANSCEIVER logic IC is used.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.In the world of electronics, this electronic device belongs to the family of AVC.Without external influences, it consumes 23μA of quiescent current.
74AVC2T45GT,115 Features
8-XFDFN package
1 circuits
8 pin count
74AVC series
8 pins
74AVC2T45GT,115 Applications
There are a lot of Nexperia USA Inc. 74AVC2T45GT,115 voltage translators & level shifters applications.
- UART
- Industrial Equipment
- One Fabrication Site
- Telecom
- Public Signage
- Enterprise
- One Fabrication Site
- Desktop PC
- Industrial
- Available in Military (-55°C to 125°C)
