74AVC4T245BQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100, 74AVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AVC4T245 |
| Pin Count | 16 |
| Output Type | Tri-State, Non-Inverted |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 4 |
| Propagation Delay | 12 ns |
| Quiescent Current | 70μA |
| Turn On Delay Time | 12.7 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 1mm |
| Length | 3.5mm |
| RoHS Status | ROHS3 Compliant |
74AVC4T245BQ-Q100X Overview
Level translators is embedded in the 16-VFQFN Exposed Pad package.Level translators is packaged in the way of Tape & Reel (TR).In its configuration, Tri-State, Non-Inverted is used as the output.Translator type Voltage Level is associated with this electrical device.Surface Mount is used to mount this electronic part.Level translators has the Channel type Bidirectional.Operation is performed at -40°C~125°C TA.In order to achieve its superior flexibility, 2 circuits are used.Usually, when a transmission line is terminated, there are 16 termination points used.A series of related parts can be determined from the base part number 74AVC4T245.The supply voltage of this device is 1.1V, and it is powered by it.16 pins are present on this board.There are a number of devices in the Automotive, AEC-Q100, 74AVC series.The 16 pins are designed into it.There are 4 bits in this electronic part, which means it is designed in such a way.Supports a voltage of 3.6V as its maximum supply voltage.There is a minimum supply voltage of 800mV for it.Level translators is configured from 0.8V~3.6V for the VCCA supply rail.0.8V~3.6V is the supply rail configuration on the VCCB.Surface Mount is used for mounting.BUS TRANSCEIVER is the logic IC it uses.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Level translators is a member of the AVC family of electronic devices.Level translators consumes 70μA of quiescent current wLevel translatorshout being affected by outside factors.
74AVC4T245BQ-Q100X Features
16-VFQFN Exposed Pad package
2 circuits
16 pin count
Automotive, AEC-Q100, 74AVC series
16 pins
74AVC4T245BQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74AVC4T245BQ-Q100X voltage translators & level shifters applications.
- Public Signage
- Extended Product Life Cycle
- Routers (routing equipment)
- Power-sensitive applications
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Motor Drives
- Test Site
- Wireless and Telecom Infrastructures
- Personal computing
- Notebook
