74AVC4T245PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100, 74AVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVC4T245 |
| Pin Count | 16 |
| Output Type | Tri-State, Non-Inverted |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 4 |
| Propagation Delay | 12 ns |
| Quiescent Current | 70μA |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AVC4T245PW-Q100J Overview
16-TSSOP (0.173, 4.40mm Width) contains it.Tape & Reel (TR) is the way it is packaged.This output is configured with Tri-State, Non-Inverted.This electrical device has a translator type of Voltage Level.The electronic part is mounted in a way that corresponds to Surface Mount.This electrical device has a Channel type of Bidirectional.The operating temperature is -40°C~125°C TA.Flexible 2 circuits enable it to achieve high performance.To end a transmission line, there are 16 types of termination that can be used.Parts that are related to 74AVC4T245 can be identified based on its base part number.In order to power the device, a voltage supply of 1.1V is required.There are 16 pins on this device.In terms of its design, it is a member of the Automotive, AEC-Q100, 74AVC series.In addition, it is designed with a pin number of 16.Electronic parts are designed with a number of bits of 4.There is a maximum voltage of 3.6V supported.In order for the machine to operate, the supply voltage must be 800mV.0.8V~3.6V is the supply rail configuration on the VCCA.In the VCCB, the supply rail is set to 0.8V~3.6V.This electronic part is mounted in the way of Surface Mount.There is BUS TRANSCEIVER logic IC in it.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.AVC is the family name of this electronic device.Level translators consumes 70μA of quiescent current wLevel translatorshout being affected by outside factors.
74AVC4T245PW-Q100J Features
16-TSSOP (0.173, 4.40mm Width) package
2 circuits
16 pin count
Automotive, AEC-Q100, 74AVC series
16 pins
74AVC4T245PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AVC4T245PW-Q100J voltage translators & level shifters applications.
- Telecom
- I2C / SMBus
- GPIO
- Power-sensitive applications
- Personal computing
- One Assembly
- Eliminate slow or noisy input signals
- Personal Electronics
- Automotive
- Industrial
