74AVC8T245PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100, 74AVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVC8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 3 ns |
| Quiescent Current | 70μA |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Channels per Circuit | 8 |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AVC8T245PW-Q100J Overview
Embedded in the 24-TSSOP (0.173, 4.40mm Width) package, it is available for you to use.Packaged as Tape & Reel (TR).Tri-State, Non-Inverted is used for the output it is configured with.Translator type Voltage Level is associated with this electrical device.A Surface Mount mounting method has been used for this electronic part.This electrical device has channel type Bidirectional.Level translators operates at -40°C~125°C TA.The circuit's superior flexibility is achieved through the use of 1 circuits.To end a transmission line, there are 24 types of termination that can be used.A base part number 74AVC8T245 indicates the related parts.Level translators is powered from a supply voltage of 1.2V.A total of 24 pins are included.Level translators belongs to the series Automotive, AEC-Q100, 74AVC.There are 24 pins on it.Electronic parts are designed with a number of bits of 8.Level translators supports a maximum supply voltage of 3.6V.There is a minimum supply voltage of 800mV for it.A VCCA supply rail is configured as 0.8V~3.6V.0.8V~3.6V is the supply rail configuration on the VCCB.Using the method of Surface Mount, this electronic component is mounted.BUS TRANSCEIVER is the logic IC it uses.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Level translators is part of the family of electronic devices called AVC.Level translators consumes 70μA of quiescent current wLevel translatorshout being affected by external factors.
74AVC8T245PW-Q100J Features
24-TSSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
Automotive, AEC-Q100, 74AVC series
24 pins
74AVC8T245PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AVC8T245PW-Q100J voltage translators & level shifters applications.
- Routers (routing equipment)
- Eliminate slow or noisy input signals
- Advanced Driver Assistance System (ADAS)
- Electronic Points of Sale
- GPIO
- Smartphone
- Extended Product Life Cycle
- Extended Product-Change Notification
- Controlled Baseline
- TVs
