74AVCH16T245DGG,18
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74AVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AVCH16T245 |
| Pin Count | 48 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 11.8 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Channels per Circuit | 8 |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74AVCH16T245DGG,18 Overview
48-TFSOP (0.240, 6.10mm Width) contains it.A Tape & Reel (TR) package is used to package it.In this configuration, the output is set to Tri-State, Non-Inverted.This electrical device has a translator type of Voltage Level.Level translators is mounted according to the Surface Mount method.Bidirectional is the type of channel for this electrical device.Level translators operates at -40°C~125°C TA.As part of the transmission line termination process, there are a total of 48 terminations.A series of related parts can be determined from the base part number 74AVCH16T245.In order for it to operate, it needs to be powered by a voltage of 1.1V.With 48 pins, it is equipped with a minimal number of connections.There are a number of devices in the series 74AVCH that belong to it.With 48 pins, it is designed.The design of this electronic part contains 16 bits.3.6V is the maximum voltage it supports.This device requires a minimum voltage of 800mV.In the VCCA, the supply rail is set to 0.8V~3.6V.VCCB is configured with a supply rail that starts at 0.8V~3.6V.Mounting this electronic component is done using the Surface Mount method.There is BUS TRANSCEIVER logic IC in it.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.AVC is the family name of this electronic device.A total of 2 elements make up this object.
74AVCH16T245DGG,18 Features
48-TFSOP (0.240, 6.10mm Width) package
48 pin count
74AVCH series
48 pins
2 elements
74AVCH16T245DGG,18 Applications
There are a lot of Nexperia USA Inc. 74AVCH16T245DGG,18 voltage translators & level shifters applications.
- Signaling Level Conversion for Clock or Data
- Personal Electronics
- One Assembly
- Extended Product-Change Notification
- Tablet PCs
- Product Traceability
- GPIO
- MDIO
- Industrial equipment
- Temperature Ranges (1)
