74AVCH16T245EV,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74AVCH |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AVCH16T245 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Channels per Circuit | 8 |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
74AVCH16T245EV,518 Overview
A package called 56-VFBGA contains it.Level translators is packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.There is Voltage Level translator type for this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.In this electrical device, the Channel type is Bidirectional.There is -40°C~125°C TA operating temperature.To achieve its exceptional flexibility, it relies on 2 circuits.Usually, when a transmission line is terminated, there are 48 termination points used.Parts that are related to 74AVCH16T245 can be identified based on its base part number.In order to power the device, a voltage supply of 1.1V is required.A total of 56 pins are included.There are a number of devices in the 74AVCH series.56 pins are used in its design.Electronic parts are designed with a number of bits of 16.Supports a voltage of 3.6V as its maximum supply voltage.There is a minimum supply voltage of 800mV for it.0.8V~3.6V is the supply rail configuration on the VCCA.VCCB is configured with a supply rail that starts at 0.8V~3.6V.The way of mounting this electronic part is Surface Mount.As part of Bus Driver/Transceivers, it belongs.In this case, the logic IC is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Electronic devices like this belong to the family AVC.Based on its reliable performance, this device is suitable for TAPE AND REEL.
74AVCH16T245EV,518 Features
56-VFBGA package
2 circuits
56 pin count
74AVCH series
56 pins
74AVCH16T245EV,518 Applications
There are a lot of Nexperia USA Inc. 74AVCH16T245EV,518 voltage translators & level shifters applications.
- Enterprise and communications
- Product Traceability
- Industrial Equipment
- Routers (Telecom Switching Equipment)
- Motor Drives
- Handset
- Monitors
- SDIO
- MDIO
- One Assembly and Test Site
