Parameters |
Mount |
Surface Mount |
Package / Case |
TFSOP |
Number of Pins |
48 |
Weight |
123.490523mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.5V |
Terminal Pitch |
0.4mm |
Pin Count |
48 |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Power Supplies |
1.5/3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.2V |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
10.1 ns |
Turn On Delay Time |
2.7 ns |
Family |
AVC |
Logic Function |
Transceiver, Translator |
Data Rate |
320 Mbps |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
Max I(ol) |
0.008 A |
High Level Output Current |
-12mA |
Low Level Output Current |
12mA |
Control Type |
COMMON CONTROL |
Translation |
1.5/3.3V&1.5/3.3V |
Length |
9.7mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
74AVCH16T245VRG4 Overview
Package TFSOP includes it.Packaged in the way of Tape and Reel.Transmission lines are terminated using 48 terminations.Level translators is powered from a supply voltage of 1.5V.Level translators is equipped wLevel translatorsh 48 pin count.Level translators has 48 pins.16 Bits are used in the design of this electronic part.The supply voltage is limited to 3.6V.A minimal voltage of 1.2V is needed to operate it.This mount is done using the method of Surface Mount.This object belongs to the category of Bus Driver/Transceivers.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.AVC is the family of this electronic device.A 1.5/3.3V power supply is required for it to operate.Also, TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B characterize it.In order for the system to operate properly, the operating temperature should be higher than -40°C.A temperature below 85°C should be used for operation.This device contains 2 elements in its design.
74AVCH16T245VRG4 Features
TFSOP package
48 pin count
48 pins
1.5/3.3V power supplies
2 elements
74AVCH16T245VRG4 Applications
There are a lot of Texas Instruments 74AVCH16T245VRG4 voltage translators & level shifters applications.
- Public Signage
- Controlled Baseline
- SMBus
- Handset
- Automotive infotainment
- Power-sensitive applications
- Printers and Other Peripherals
- Debouncing a mechanical switch
- One Assembly
- Driving Indicator LEDs or Buzzers