74AVCH1T45GW,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVCH1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 24μA |
| Turn On Delay Time | 28 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVCH1T45GW,125 Overview
Package 6-TSSOP, SC-88, SOT-363 includes it.Tape & Reel (TR) is the packaging method.Tri-State, Non-Inverted is used for the output it is configured with.Translator type Voltage Level is assigned to this electrical device.Level translators is mounted according to the Surface Mount method.In this electrical device, the Channel type is Bidirectional.The operating temperature is -40°C~125°C TA.Transmission lines are terminated using 6 terminations.Based on this base part number 74AVCH1T45, its related parts can be identified.In order for it to operate, it needs to be powered by a voltage of 1.1V.6 pins are present on this board.There are a number of devices in the series 74AVCH that belong to it.With 6 pins, it is designed.There are 1 bits in this electronic part, which means it is designed in such a way.Supports a voltage of 3.6V as its maximum supply voltage.There is a minimum supply voltage of 800mV for it.There is a configuration of 0.8V~3.6V for the VCCA supply rail.In the VCCB, the supply rail is set to 0.8V~3.6V.This mount is done using the method of Surface Mount.Level translators is 1 channels.In this case, the logic IC is BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.AVC is the family of this electronic device.Without external influence, it consumes 24μA of quiescent current.
74AVCH1T45GW,125 Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74AVCH series
6 pins
74AVCH1T45GW,125 Applications
There are a lot of Nexperia USA Inc. 74AVCH1T45GW,125 voltage translators & level shifters applications.
- Controlled Baseline
- ADAS Fusion
- Industrial Equipment
- Tablet
- Wearable Health and Fitness Devices
- Enterprise
- Products With Many I
- Debouncing a Mechanical Switch
- One Fabrication Site
- Personal computing
