74AVCH20T245GRE4
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 56 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Propagation Delay | 10.3 ns |
| Quiescent Current | 65μA |
| Turn On Delay Time | 2.9 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 6.4 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
74AVCH20T245GRE4 Overview
Embedded in the TSSOP package, it is available for you to use.Tape and Reel is the way it is packaged.Transmission lines are terminated using 56 terminations.Level translators is powered from a supply voltage of 1.5V.There are 56 pins on it.Designed with 56 pins, it is compatible with a wide range of devices.The design of this electronic part contains 20 bits.3.6V is the maximum voltage it supports.The minimal supply voltage is 1.2V.The mount method is Surface Mount.As part of Bus Driver/Transceivers, this part is included.There is a logic IC BUS TRANSCEIVER used in the system.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.This electronic device belongs to the family of AVC.Level translators consumes 65μA of quiescent current wLevel translatorshout being affected by outside factors.A 1.5/3.3V power supply is required for it to operate.In order for the system to operate properly, the operating temperature should be higher than -40°C.Ideally, the operating temperature should be lower than 85°C.As far as this device is concerned, it contains 2 elements.
74AVCH20T245GRE4 Features
TSSOP package
56 pin count
56 pins
1.5/3.3V power supplies
2 elements
74AVCH20T245GRE4 Applications
There are a lot of Texas Instruments 74AVCH20T245GRE4 voltage translators & level shifters applications.
- Tablet
- Motor Drives
- Handset
- Controlled Baseline
- Personal computers
- Industrial
- TVs
- Test Site
- Extended Product-Change Notification
- Products With Many I
