74AVCH2T45GF,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 23μA |
| Turn On Delay Time | 15.8 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
74AVCH2T45GF,115 Overview
In the package 8-XFDFN, it can be found.Packaged as Tape & Reel (TR).Tri-State, Non-Inverted is used for the output it is configured with.There is Voltage Level translator type for this electrical device.Mounting this electronic component follows the Surface Mount method.This electrical device has a Channel type of Bidirectional.During operation, the temperature is set to -40°C~125°C TA.1 circuits are used to achieve its superior flexibility.Transmission lines are terminated using 8 terminations.Based on this base part number 74AVCH2T45, its related parts can be identified.A supply voltage of 1.2V powers it.A total of 8 pins are included.The device is part of the 74AVCH series.In addition, it is designed with a pin number of 8.There are 2 bits in this electronic part.Level translators supports a maximum supply voltage of 3.6V.A voltage of 800mV is the minimum supply voltage required for it to operate.In the VCCA, the supply rail is set to 0.8V~3.6V.In the VCCB supply rail, 0.8V~3.6V is configured.Surface Mount is used for mounting.Level translators is 2 channels.In this case, the logic IC is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the AVC family.Level translators consumes 23μA of quiescent current wLevel translatorshout being affected by outside factors.
74AVCH2T45GF,115 Features
8-XFDFN package
1 circuits
8 pin count
74AVCH series
8 pins
74AVCH2T45GF,115 Applications
There are a lot of Nexperia USA Inc. 74AVCH2T45GF,115 voltage translators & level shifters applications.
- Enterprise
- Driving Indicator LEDs or Buzzers
- Routers (Telecom Switching Equipment)
- Notebook
- Available in Military (–55°C/125°C) Temperature Range
- Advanced Driver Assistance System (ADAS)
- UART
- Signaling Level Conversion for Clock or Data
- Routers (routing equipment)
- Industrial
