74AVCH2T45GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 23μA |
| Turn On Delay Time | 19.6 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVCH2T45GT,115 Overview
In the 8-XFDFN package, it is embedded.The package is in the form of Tape & Reel (TR).This output uses Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.This electronic part is mounted in the way of Surface Mount.There is Bidirectional channel type for this electrical device.-40°C~125°C TA is the operating temperature.Flexible 1 circuits enable it to achieve high performance.Usually, when a transmission line is terminated, there are 8 termination points used.The base part number 74AVCH2T45 can be used to find its related parts.This device is powered by a supply voltage of 1.1V which is applied to it.With 8 pins, it is equipped with a minimal number of connections.Level translators is a type of FPGA belonging to the 74AVCH series.Designed with 8 pins, it is compatible with a wide range of devices.The design of this electronic part is based on 2 bits.Voltages up to 3.6V can be supplied.The minimal voltage for operation is 800mV.0.8V~3.6V is the configuration of the VCCA supply rail.Level translators is configured from 0.8V~3.6V for the VCCB supply rail.Mounting this electronic component is done using the Surface Mount method.Channels are set to 2.BUS TRANSCEIVER is the logic IC it uses.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Level translators is part of the family of electronic devices called AVC.Level translators consumes 23μA of quiescent current wLevel translatorshout being affected by outside factors.
74AVCH2T45GT,115 Features
8-XFDFN package
1 circuits
8 pin count
74AVCH series
8 pins
74AVCH2T45GT,115 Applications
There are a lot of Nexperia USA Inc. 74AVCH2T45GT,115 voltage translators & level shifters applications.
- Debouncing a Mechanical Switch
- Temperature Ranges (1)
- SMBus
- I2C
- Extended Product Life Cycle
- Personal computing
- Automotive infotainment
- Monitors
- Tablet
- LCD Panels Using GIP / GOA / ASG Technology
