74AXP1G157GNH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Supplier Device Package | 6-XSON (0.9x1) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74AXP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Multiplexer |
| Resistance | 10kOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 0.7V~2.75V |
| Circuit | 1 x 2:1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 700mV |
| Quiescent Current | 10nA |
| Logic Function | Multiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| RoHS Status | ROHS3 Compliant |
74AXP1G157GNH Overview
Due to the lack of space on the board, digital switch is provided in the 6-XFDFN.Tape & Reel (TR) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.Multiplexer is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 0.7V~2.75V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74AXP series can be used in a wide range of applications.There is a supply type of Single employed as part of this supply.It is configured with 6 pins.It is positioned in the direction of Surface Mount.It consumes 10nA current of multiplexer ic since it is not affected by external factors.This signal switching operates at a resistance of 10kOhm.A maximum temperature of 85°C is acceptable for this signal switch.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.It is specified that the signal switches should operate at 2.75V as its maximum supply voltage.A minimum supply voltage of 700mV is required to operate the digital swith.
74AXP1G157GNH Features
Supplied in the 6-XFDFN package
Adopting a supply type of Single
74AXP1G157GNH Applications
There are a lot of Nexperia USA Inc. 74AXP1G157GNH Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- RF-based home automation system
- HD surveillance system
- Data bus control
- Decimal decoder
- Automatic health monitoring systems
- Microprocessor instruction decoding
- A robotic vehicle with the metal detector
- Speed control of medern motors
- Telephone network
