74CB3Q3125DBQRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 4Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 200 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 6.7 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CB3Q3125DBQRG4 Overview
Digital switch is provided in the SSOP for the purpose of saving board space.It is packaged according to the Tape and Reel method.The basic configuration of this system includes 16 terminations.In this case, 2.5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.There are 1 bits signal multiplexer provides.Normally, 2.5/3.3V is powered by a battery.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 1mA current of multiplexer ic.2 is the resistance at which it operates.A resistance of 4Ohm is used to operate it.For transmission, there are 4 channels in the turn signal switch's circuit.The maximum operating temperature of 85°C is acceptable for this signal switch.Ideally, the temperature of the multiplexer should not exceed -40°C.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.Device specifications require that the minimum supply voltage is 2.3V.It also provides improved characteristics of ALSO OPERATES WITH 3.3V SUPPLY.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
74CB3Q3125DBQRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
BUS DRIVER as the logic IC
74CB3Q3125DBQRG4 Applications
There are a lot of Texas Instruments 74CB3Q3125DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- Data communication
- Microprocessor instruction decoding
- Data demultiplexing
- Data distribution
- HDMI applications
- Make half adder
- Transmission from the computer system of a satellite
- Code converters
- War field flying robot with a night vision flying camera
