74CB3Q3305DCURE4
| Parameters | |
|---|---|
| Bandwidth | 500MHz |
| Nominal Input Voltage | 1.7V |
| Output Polarity | TRUE |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CB3Q3305 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 250μA |
| Output Current | 30mA |
| Number of Bits | 1 |
| Propagation Delay | 150 ps |
| Quiescent Current | 700μA |
| Turn On Delay Time | 5 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
74CB3Q3305DCURE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-VFSOP (0.091, 2.30mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.It is designed with 8 terminations as part of its basic configuration.Its logic switch base part number is 74CB3Q3305 which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.Currently, this turn signal switch has a total of 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.It is configured with 8 pins.Surface Mount is the way it is mounted.There are 1 bits in signal multiplexer.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.Not being affected by the external factors, consumes 700μA current of multiplexer ic.A resistance of 2 governs its operation.A resistance of 9Ohm is used to operate the signal switching.Additionally, ALSO OPERATES WITH 3.3V SUPPLY provides improved characteristics.The mux switch configuration contains 2 elements.For higher switches' flexibility, 30mA is provided as an output current.
74CB3Q3305DCURE4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY
74CB3Q3305DCURE4 Applications
There are a lot of Texas Instruments 74CB3Q3305DCURE4 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Logic circuits
- Analog, digital or video signal switching
- Night vision cameras
- Combinational circuit
- Make half adder
- Automation system
- Textile mills
- A robotic vehicle with the metal detector
- Steel plants
