Parameters |
Base Part Number |
74CB3Q3305 |
Pin Count |
8 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Channels |
2 |
Number of Ports |
2 |
Nominal Supply Current |
250μA |
Output Current |
30mA |
Number of Bits |
1 |
Propagation Delay |
150 ps |
Quiescent Current |
700μA |
Turn On Delay Time |
5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Nominal Input Voltage |
1.7V |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.09 ns |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Power Supply Current-Max (ICC) |
0.7mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
900μm |
Length |
2.3mm |
Width |
2mm |
Thickness |
850μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Number of Pins |
8 |
Weight |
10.007382mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
9Ohm |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
74CB3Q3305DCURG4 Overview
Providing this information in the 8-VFSOP (0.091, 2.30mm Width) enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.As a member of 74CB series, the multiplexers can be used for a wide range of applications.The basic configuration includes 8 terminations.There is a base part number of 74CB3Q3305 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 2.5V voltage is supplied.Currently, this turn signal switch has a total of 8 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.With 8 pins, it is configured.The mounting is in the way of Surface Mount.The multiplexer ic provides 1 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 700μA current of multiplexer ic.The switches is packaged according to the way of TR.The resistance is 2.The resistance of the signal switching is 9Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.It also provides improved characteristics of ALSO OPERATES WITH 3.3V SUPPLY.The output current of 30mA is provided for higher switches' flexibility.
74CB3Q3305DCURG4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY
74CB3Q3305DCURG4 Applications
There are a lot of Texas Instruments 74CB3Q3305DCURG4 Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Textile mills
- Small scale TV wall
- Microprocessor input/output systems
- Paper plants
- Used to connect a single source to multiple destinations
- Enabling different functions units in microprocessor instruction decoding
- Time division multiplexing system
- Microprocessor instruction decoding
- RF-based home automation system