Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Number of Pins |
8 |
Weight |
9.610488mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
9Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CB3Q3306 |
Pin Count |
8 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Channels |
2 |
Number of Ports |
2 |
Nominal Supply Current |
250μA |
Output Current |
30mA |
Number of Bits |
1 |
Propagation Delay |
200 ps |
Quiescent Current |
250μA |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
900μm |
Length |
2.3mm |
Width |
2mm |
Thickness |
850μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CB3Q3306ADCURE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-VFSOP (0.091, 2.30mm Width).The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CB series, these multiplexers have a wide range of applications.There is a design for terminating 8 as part of its basic configuration.The base part number is 74CB3Q3306, which is also useful when looking up signal switch's related components.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 8 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.Currently, it is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer contains 1 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 250μA current of multiplexer ic without external influences.TR is used to package the switches.This signal switching operates at a resistance of 2.In terms of resistance, it has a value of 9Ohm.The turn signal switch's circuit consists of 2 transmission channels.For increased switches' flexibility, the output current of 30mA is provided.
74CB3Q3306ADCURE4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
74CB3Q3306ADCURE4 Applications
There are a lot of Texas Instruments 74CB3Q3306ADCURE4 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- CPU memory location identification
- Paper plants
- High-performance memory systems
- To select different task for memory in microprocessor memory systems
- CNC machines
- Arithmetic Logic Units
- Telephone network
- Encrypted communications system
- Metal detectors