banner_page

74CB3Q3306ADCURG4

2.3V~3.6V 8 Pin 74CB3Q3306 Signal switch74CB Series


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74CB3Q3306ADCURG4
  • Package: 8-VFSOP (0.091, 2.30mm Width)
  • Datasheet: PDF
  • Stock: 396
  • Description: 2.3V~3.6V 8 Pin 74CB3Q3306 Signal switch74CB Series (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VFSOP (0.091, 2.30mm Width)
Number of Pins 8
Weight 10.007382mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CB
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Bus Switch
Resistance 9Ohm
Voltage - Supply 2.3V~3.6V
Base Part Number 74CB3Q3306
Circuit 1 x 1:1
Number of Channels 2
Nominal Supply Current 250μA
Output Current 30mA
Propagation Delay 200 ps
Quiescent Current 700μA
Supply Type Single
Bandwidth 500MHz
High Level Output Current -64mA
Low Level Output Current 64mA
Voltage Supply Source Single Supply
Height 900μm
Length 2.3mm
Width 2mm
Thickness 850μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74CB3Q3306ADCURG4 Overview


Due to the lack of space on the board, digital switch is provided in the 8-VFSOP (0.091, 2.30mm Width).The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CB series can be used in a wide range of applications.The base part number is 74CB3Q3306, which can also be used to find its logic switch related parts.In this case, the supply type is Single.The board is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.It consumes 700μA current of multiplexer ic since it is not affected by external factors.As far as the resistance is concerned, it operates with 9Ohm.This turn signal switch's circuit uses 2 transmission channels.The output current of 30mA is provided for higher switches' flexibility.

74CB3Q3306ADCURG4 Features


Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single

74CB3Q3306ADCURG4 Applications


There are a lot of Texas Instruments 74CB3Q3306ADCURG4 Signal Switches / Multiplexers / Decoders applications.

  • Solenoid cooling fan
  • CPU memory location identification
  • Data demultiplexing
  • Automation system
  • Telephone network
  • Memory system of computers
  • Video transmission
  • Paper plants
  • Night vision cameras
  • Data bus control

Write a review

Note: HTML is not translated!
    Bad           Good