banner_page

74CB3T3384DBQRG4

2.3V~3.6V 24 Pin 74CB3T3384 Signal switch74CB Series


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74CB3T3384DBQRG4
  • Package: 24-SSOP (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 524
  • Description: 2.3V~3.6V 24 Pin 74CB3T3384 Signal switch74CB Series (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.154, 3.90mm Width)
Number of Pins 24
Weight 129.500622mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CB
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Type Bus Switch
Resistance 8Ohm
Voltage - Supply 2.3V~3.6V
Base Part Number 74CB3T3384
Circuit 5 x 1:1
Number of Channels 10
Nominal Supply Current 40μA
Output Current 64mA
Number of Bits 20
Propagation Delay 10.5 ns
Quiescent Current 40μA
Turn On Delay Time 10.5 ns
Supply Type Single
Bandwidth 100MHz
Nominal Input Voltage 1.7V
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Independent Circuits 2
Height 1.75mm
Length 8.65mm
Width 3.9mm
Thickness 1.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74CB3T3384DBQRG4 Overview


For the purpose of saving board space, digital switch is included in the 24-SSOP (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74CB series can be used in a wide range of applications.You can also find related parts by using its logic switch base part number of 74CB3T3384.As a type of supply, Single is employed.With 24 pins, it is configured.It is mounted in the way of Surface Mount.Signal multiplexer provides 20 bits.No external influence consumes 40μA current of multiplexer ic.As far as the resistance is concerned, it operates with 8Ohm.This turn signal switch's circuit is based on a circuit with 10 channels.The output current of 64mA is provided for higher switches' flexibility.

74CB3T3384DBQRG4 Features


Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single

74CB3T3384DBQRG4 Applications


There are a lot of Texas Instruments 74CB3T3384DBQRG4 Signal Switches / Multiplexers / Decoders applications.

  • CPU memory location identification
  • Analog, digital or video signal switching
  • To select different devices in microprocessor input
  • Medical industry
  • Enabling block of memory depending on address in memory chips
  • Time division multiplexing system
  • Data-routing applications
  • Code conversion
  • Combinational circuit
  • A/D converters

Write a review

Note: HTML is not translated!
    Bad           Good