74CBT162292DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 39Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT162292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Bits | 12 |
| Propagation Delay | 1.85 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 64mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74CBT162292DGVRE4 Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.Multiplexers in the 74CBT series are suitable for a wide range of applications.As part of its basic configuration, 56 terminations are designed as a part of it.There is a base part number 74CBT162292 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.There are 56 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.The board has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 12 bits.Vsup should be kept at 4V to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The turn signal switch has 2 outputs designed for operation.In electronic terms, the digital switch ic is classified as Other Logic ICs.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.In terms of resistance, it has a value of 39Ohm.
74CBT162292DGVRE4 Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBT162292DGVRE4 Applications
There are a lot of Texas Instruments 74CBT162292DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Medical industry
- Signal router
- RF-based home automation system
- Encrypted communications system
- Small scale TV wall
- HD surveillance system
- Analog to digital conversion
- Paper plants
- Medium scale TV wall
