Parameters |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT1G125 |
Pin Count |
5 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
1μA |
Number of Bits |
1 |
Propagation Delay |
5.5 ns |
Quiescent Current |
1μA |
Turn On Delay Time |
5.5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
11.198062mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Type |
Bus Switch |
Resistance |
20Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
74CBT1G125DBVRE4 Overview
In order to save board space, digital switch is located in the SC-74A, SOT-753.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 5 range.The part number for 74CBT1G125 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.Currently, this turn signal switch has a total of 5 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.It is configured with 5 pins.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer consists of 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.No external influence consumes 1μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.TR is used to package the switches.The resistance is 2.It operates with a resistance of 20Ohm.The mux switch configuration contains 1 elements.
74CBT1G125DBVRE4 Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBT1G125DBVRE4 Applications
There are a lot of Texas Instruments 74CBT1G125DBVRE4 Signal Switches / Multiplexers / Decoders applications.
- Image transmission
- Make full adder
- Data transfer
- Textile mills
- Electronic circuits
- Automatic health monitoring systems
- Decimal decoder
- Combinational circuit
- Night vision cameras
- Make half adder