74CBT1G125DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 350 ps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBT1G125DCKRG4 Overview
For the purpose of saving board space, digital switch is included in the 5-TSSOP, SC-70-5, SOT-353.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.This configuration includes 5 terminations as part of its basic functionality.The base part number is 74CBT1G125, which is also useful when looking up signal switch's related components.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 5 component pins.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.With 5 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.There are 1 bits signal multiplexer provides.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is a category for the digital switch ics.Without any external influences, it consumes 1μA current of multiplexer ic at all times.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.The resistance is 2.The system operates with a resistance of 10Ohm.The mux switch configuration contains 1 elements.
74CBT1G125DCKRG4 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBT1G125DCKRG4 Applications
There are a lot of Texas Instruments 74CBT1G125DCKRG4 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Automatic health monitoring systems
- Robotic vehicles
- Logic gates for other digital devices
- Make half adder
- Solenoid cooling fan
- Analog to digital conversion
- Data communication
- Paper plants
- Data distribution
