74CBTD16211DLRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTD16211 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Nominal Input Voltage | 2V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTD16211DLRG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTD series.It is designed with 56 terminations as part of its basic configuration.In addition, it also has a base part number of 74CBTD16211, which can be used to find related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 56 components that can be connected to each pin.Conductors terminate at GULL WING in this design.This supply type employs Single.With 56 pins, it is configured.The mount is in Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 24 bits provided.In order to maintain mux switch's normal operation, power is provided to 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The system operates with a resistance of 2.The resistance of the signal switching is 7Ohm.For higher switches' flexibility, 64mA is provided as an output current.
74CBTD16211DLRG4 Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTD16211DLRG4 Applications
There are a lot of Texas Instruments 74CBTD16211DLRG4 Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Logic circuits
- Code converters
- Recording transmission
- Idle motor
- Metal detectors
- PCIe
- D/A converters
- Automatic health monitoring systems
- Logic gates for other digital devices
