74CBTD1G125DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 1 |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 250 ps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTD1G125DCKRG4 Overview
Providing this information in the 5-TSSOP, SC-70-5, SOT-353 enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers of the 74CBTD series can be used in a wide range of applications.The basic configuration of this system includes 5 terminations.Its logic switch base part number is 74CBTD1G125 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 5 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with a 5 pin configuration.The mounting is in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.During mux switch's normal operation, 5V is provided with a power supply.This is an the digital switch ic that is classified as Bus Driver/Transceivers.No external influence consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.A resistance of 2 is used to operate the signal switching.It operates with a resistance of 35Ohm.There are 1 elements used for the mux switch configuration.
74CBTD1G125DCKRG4 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTD1G125DCKRG4 Applications
There are a lot of Texas Instruments 74CBTD1G125DCKRG4 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Memory chips
- VGA
- Speed synchronization of multiple motors in industries
- Relay
- CNC machines
- Signal router
- To select different devices in microprocessor input
- Time division multiplexing system
- Data distribution
