banner_page

74CBTD3384CDBQRE4

24 Terminations24 Pin Signal switch1 FunctionsMin 4.5V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74CBTD3384CDBQRE4
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 484
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Package / Case SSOP
Number of Pins 24
Weight 129.500622mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 2
Number of Terminations 24
Resistance 20Ohm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 24
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Nominal Supply Current 1.5mA
Current - Output 64mA
Number of Bits 10
Propagation Delay 150 ps
Quiescent Current 1.5mA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 2
Height Seated (Max) 1.75mm
Length 8.65mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

74CBTD3384CDBQRE4 Overview


It is included in the SSOP in order to save board space.Tape and Reel represents its packaging.The basic configuration of this system includes 24 terminations.The multiplexer's system is powered by 5V volts.Signal switch has 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.The board has 24 pins configured.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.A resistance of 20Ohm is used to operate the signal switching.A maximum temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.5V.According to its specifications, the digital swith requires a minimum supply voltage of 4.5V.The logic IC of the digitalswitch is BUS DRIVER.

74CBTD3384CDBQRE4 Features


Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

74CBTD3384CDBQRE4 Applications


There are a lot of Texas Instruments 74CBTD3384CDBQRE4 Signal Switches / Multiplexers / Decoders applications.

  • Speed synchronization of multiple motors in industries
  • Textile mills
  • War field flying robot with a night vision flying camera
  • High-performance memory-decoding applications
  • Automation system
  • Electronics industry
  • Metal detectors
  • Small scale TV wall
  • Data transfer
  • Seven segment displays

Write a review

Note: HTML is not translated!
    Bad           Good