74CBTD3861DBQRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 10 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 350 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Nominal Input Voltage | 2V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTD3861DBQRG4 Overview
For the purpose of saving board space, digital switch is included in the 24-SSOP (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Several applications are possible for 74CBTD series multiplexers.There is a design for terminating 24 as part of its basic configuration.The base part number is 74CBTD3861, which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.This turn signal switch has 24 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.A total of 24 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 10 bits.mux switch's normal operation requires the power supply of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 1.5mA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.Currently, the switches is packaged in accordance with the TR method.2 ports are used for some other peripheral signal switchings to plug in.With a resistance of 7Ohm, it operates.For greater switches' flexibility, the output current of 64mA is provided.
74CBTD3861DBQRG4 Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTD3861DBQRG4 Applications
There are a lot of Texas Instruments 74CBTD3861DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- VGA
- Data demultiplexing
- Enabling different functions units in microprocessor instruction decoding
- Automatic Monitoring systems
- War field flying robot with a night vision flying camera
- Analog to digital conversion
- Implementing boolean functions with multiple variables
- HDMI applications
- Recording transmission
