74CBTH16211DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTH16211 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 12 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 11.3mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74CBTH16211DGVRE4 Overview
Due to the fact that it is provided in the 56-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.Mounting is performed using Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74CBTH series, the multiplexers can be used for a wide range of applications.The basic configuration of this system includes 56 terminations.The base part number is 74CBTH16211, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.This multiplexer ic is configured with 56 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 12 bits available.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 7Ohm.
74CBTH16211DGVRE4 Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74CBTH16211DGVRE4 Applications
There are a lot of Texas Instruments 74CBTH16211DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Memory system of computers
- Automation system
- To select different task for memory in microprocessor memory systems
- Arithmetic Logic Units
- High-performance memory systems
- D/A converters
- To select different devices in microprocessor input
- Relay
- CNC machines
