74CBTH16211DGVRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTH16211 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 12 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 11.3mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74CBTH16211DGVRG4 Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBTH series can be used in a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.There is a base part number of 74CBTH16211 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.This turn signal switch has 56 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.Currently, it is configured with a 56 pin configuration.The mounting point is Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer consists of 12 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.It is provided that 5V has a power supply in order to function normally.Bus Driver/Transceivers is the classification for this the digital switch ic.The system operates with a resistance of 2.With a resistance of 14Ohm, it operates.
74CBTH16211DGVRG4 Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74CBTH16211DGVRG4 Applications
There are a lot of Texas Instruments 74CBTH16211DGVRG4 Signal Switches / Multiplexers / Decoders applications.
- Image transmission
- Computer memory
- HDMI applications
- Relay
- Decimal decoder
- HD surveillance system
- Time division multiplexing system
- Microprocessor memory systems
- Speed control of medern motors
- Small scale TV wall
