74CBTK16245DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74CBTK16245DGGRE4 Overview
Providing this information in the 48-TFSOP (0.240, 6.10mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.Multiplexers in the 74CBTK series are suitable for a wide range of applications.There are 48 terminations included in its basic configuration.In addition, it also has a base part number of 74CBTK16245, which can be used to find related parts.In this case, 5V is the voltage supplied to the multiplexer's system.There are 48 component pins in this turn signal switch.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 48 pins.It is positioned in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 8 bits signal multiplexer provides.Vsup should be kept at 4V to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.With a resistance of 14Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
74CBTK16245DGGRE4 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTK16245DGGRE4 Applications
There are a lot of Texas Instruments 74CBTK16245DGGRE4 Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Memory chips
- Injectors
- Metal detectors
- Data-routing applications
- Electronics industry
- Textile mills
- Automatic health monitoring systems
- Night vision cameras
- Recording transmission
