Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTK |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Type |
Bus Switch |
Resistance |
14Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBTK16245 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
64mA |
Low Level Output Current |
15mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
74CBTK16245DGGRG4 Overview
Digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTK series can be used for a wide range of applications.The basic configuration of this system includes 48 terminations.The part number for 74CBTK16245 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 48 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The resistance is 2.The resistance of the signal switching is 14Ohm.For greater switches' flexibility, 64mA provides the output current.
74CBTK16245DGGRG4 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTK16245DGGRG4 Applications
There are a lot of Texas Instruments 74CBTK16245DGGRG4 Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Logic circuits
- Control unit of Central Processing unit (CPU)
- Speed synchronization of multiple motors in industries
- RF-based home automation system
- High-performance memory systems
- PCIe
- Night vision cameras
- Telephone network
- Enabling different rows of memory depending on address in memory chips