74CBTK16245DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74CBTK16245DGVRE4 Overview
Providing this information in the 48-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CBTK series can be used in a wide range of applications.Its basic configuration includes terminations in the 48 range.In addition, it also has a base part number of 74CBTK16245, which can be used to find related parts.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 48 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 48 pins configured.Surface Mount is the way it is mounted.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 8 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.It operates with a resistance of 14Ohm.For increased switches' flexibility, the output current of 64mA is provided.
74CBTK16245DGVRE4 Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTK16245DGVRE4 Applications
There are a lot of Texas Instruments 74CBTK16245DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Data bus control
- Analog to digital conversion
- Solenoid cooling fan
- Implementing boolean functions with multiple variables
- Enabling different rows of memory depending on address in memory chips
- Enabling different functions units in microprocessor instruction decoding
- Data transfer
- Logic circuits
- Data distribution
