74CBTK16245DLRG4
| Parameters | |
|---|---|
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
74CBTK16245DLRG4 Overview
For the purpose of saving board space, digital switch is included in the 48-BSSOP (0.295, 7.50mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CBTK series can be used in a wide range of applications.As parts of its basic configuration, 48 terminations are desgined.The part number for 74CBTK16245 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 48 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply Single that is employed in this case.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 8 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.During mux switch's normal operation, 5V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.2 is the resistance at which it operates.With a resistance of 14Ohm, it operates.It is possible to provide a current output of 64mA for greater switches' flexibility.
74CBTK16245DLRG4 Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTK16245DLRG4 Applications
There are a lot of Texas Instruments 74CBTK16245DLRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Medium scale TV wall
- Code converters
- Video transmission
- LVDS
- Steel plants
- High-performance memory systems
- VGA
- Make half adder
- Enabling block of memory depending on address in memory chips
