74CBTLV16210GRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV16210 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 7.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV16210GRG4 Overview
For the purpose of saving board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.Among its basic features are 48 terminations.The part number for 74CBTLV16210 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V voltage.Signal switch has 48 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.With 48 pins, it is configured.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of CBTLV/3B.In the signal multiplexer, there are 20 bits available.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.Without external influences, it consumes 10μA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 7Ohm.For greater switches' flexibility, 64mA provides the output current.
74CBTLV16210GRG4 Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
74CBTLV16210GRG4 Applications
There are a lot of Texas Instruments 74CBTLV16210GRG4 Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- Memory system of computers
- Transmission from the computer system of a satellite
- Arithmetic Logic Units
- To select different task for memory in microprocessor memory systems
- Data bus control
- Telephone network
- RF-based home automation system
- A/D converters
- Microprocessor memory systems
