74CBTLV16210VRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Weight | 120.003531mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Resistance | 7Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Pin Count | 48 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Current - Output | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV16210VRG4 Overview
In order to save board space, digital switch is located in the TFSOP.As a result, it is packaged in a way that is referred to as Tape and Reel.This configuration includes 48 terminations as part of its basic functionality.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 48 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.The board is configured with 48 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer consists of 20 bits.The part belongs to the Bus Driver/Transceivers category of signal switches.Without the influence of external factors, it consumes 10μA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 7Ohm.A maximum temperature of 85°C is acceptable for this signal switch.Temperatures of the multiplexer should be kept at -40°C.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.It uses the logic IC BUS DRIVER as its core logic unit.
74CBTLV16210VRG4 Features
Supplied in the TFSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV16210VRG4 Applications
There are a lot of Texas Instruments 74CBTLV16210VRG4 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Data transfer
- Logic circuits
- Memory chips
- To select different task for memory in microprocessor memory systems
- Arithmetic Logic Units
- Automation system
- Enabling different functions units in microprocessor instruction decoding
- Data bus control
- Home automation system
