74CBTLV16211CGRDR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 54 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Nominal Input Voltage | 1.7V |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 8mm |
| Width | 5.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
74CBTLV16211CGRDR Overview
Providing this information in the 54-TFBGA enables digital switch board space to be saved.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.The basic configuration of this system includes 54 terminations.You can also find related parts by using its logic switch base part number of 74CBTLV16211.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 54 component pins.It employs BALL as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.Currently, it is configured with 54 pins.The mount is in Surface Mount.In the CBTLV/3B family, the logic switch is included.Signal multiplexer consists of 24 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.A resistance of 20Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.
74CBTLV16211CGRDR Features
Supplied in the 54-TFBGA package
Adopting a supply type of Single
74CBTLV16211CGRDR Applications
There are a lot of Texas Instruments 74CBTLV16211CGRDR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Analog to digital conversion
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Logic gates for other digital devices
- D/A converters
- Recording transmission
- GLAN
- To select different task for memory in microprocessor memory systems
- Make half adder
