74CBTLV16211CZRDR
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 54 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Nominal Input Voltage | 1.7V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 8mm |
| Width | 5.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV16211CZRDR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 54-TFBGA.The package is packaged in accordance with Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74CBTLV series can be used in a wide range of applications.There are 54 terminations included in its basic configuration.In addition, it also has a base part number of 74CBTLV16211, which can be used to find related parts.The multiplexer's system works with 2.5V voltage.This turn signal switch consists of 54 component pins.As a result, BALL represents the end of the conductors.As a type of supply, Single is employed.It is configured with 54 pins.It is positioned in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.There are 24 bits signal multiplexer provides.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.2 ports are used for some other peripheral signal switchings to plug in.This signal switching operates at a resistance of 20Ohm.The output current of 64mA is provided for higher switches' flexibility.
74CBTLV16211CZRDR Features
Supplied in the 54-TFBGA package
Adopting a supply type of Single
74CBTLV16211CZRDR Applications
There are a lot of Texas Instruments 74CBTLV16211CZRDR Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Data collection system
- Speed synchronization of multiple motors in industries
- Combinational circuit
- CPU memory location identification
- Computer memory
- Metal detectors
- Analog, digital or video signal switching
- High-performance memory-decoding applications
- Implementing boolean functions with multiple variables
