74CBTLV16211DGG,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 60Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Number of Bits | 24 |
| Propagation Delay | 310 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV16211DGG,11 Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.Among its basic features are 56 terminations.There is a base part number 74CBTLV16211 that can be used to locate signal switch's related components as well.In multiplexer's system, 3.3V is the voltage supplied.Currently, this turn signal switch has a total of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.Currently, it is configured with a 56 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 24 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.2 is the resistance at which it operates.A resistance of 60Ohm is used to operate it.
74CBTLV16211DGG,11 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
74CBTLV16211DGG,11 Applications
There are a lot of Nexperia USA Inc. 74CBTLV16211DGG,11 Signal Switches / Multiplexers / Decoders applications.
- Logic circuits
- Time division multiplexing system
- Code conversion
- Transmission from the computer system of a satellite
- Arithmetic Logic Units
- Electronically controlled engine system
- Analog to digital conversion
- Data demultiplexing
- HD surveillance system
- Memory chips
