74CBTLV16211DLRG4

56 Terminations2.3V~3.6V 56 Pin 74CBTLV16211 Signal switch74CBTLV Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-74CBTLV16211DLRG4
Package: 56-BSSOP (0.295, 7.50mm Width)
Datasheet: -
Stock: 959
Description: 56 Terminations2.3V~3.6V 56 Pin 74CBTLV16211 Signal switch74CBTLV Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-BSSOP (0.295, 7.50mm Width)
Number of Pins	56
Weight	694.790113mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Type	Bus Switch
Resistance	4Ohm
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.635mm
Base Part Number	74CBTLV16211
Pin Count	56
Circuit	12 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	24
Propagation Delay	7.7 ns
Quiescent Current	10μA
Turn On Delay Time	7.7 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.01mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.79mm
Length	18.41mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74CBTLV16211DLRG4 Overview

Due to the fact that it is provided in the 56-BSSOP (0.295, 7.50mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.The part number for 74CBTLV16211 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 2.5V.Currently, this turn signal switch has a total of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.The board is configured with 56 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.Signal multiplexer consists of 24 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 4Ohm.For increased switches' flexibility, the output current of 64mA is provided.