Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBTLV16211 |
Pin Count |
56 |
Circuit |
12 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
24 |
Propagation Delay |
7.7 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
250 ps |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.01mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Type |
Bus Switch |
Resistance |
27Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
74CBTLV16211GRG4 Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .Bus Switch is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sAs a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.There is a design for terminating 56 as part of its basic configuration.The base part number is 74CBTLV16211, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 2.5V voltage.This turn signal switch contains 56 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.Currently, it is configured with a 56 pin configuration.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.There are 24 bits in signal multiplexer.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.According to TR, the switches is packaged.A resistance of 2 is used to operate the signal switching.It operates with a resistance of 27Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
74CBTLV16211GRG4 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
74CBTLV16211GRG4 Applications
There are a lot of Texas Instruments 74CBTLV16211GRG4 Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Electronic circuits
- Automatic health monitoring systems
- CPU memory location identification
- Transmission from the computer system of a satellite
- Electronics industry
- Enabling different rows of memory depending on address in memory chips
- Code conversion
- Night vision cameras
- D/A converters