74CBTLV16245PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV16245PAG Overview
For the purpose of saving board space, digital switch is included in the TSSOP.As parts of its basic configuration, 48 terminations are desgined.The turn signal switch is supplied with a voltage of 2.5V volts.Signal switch has 48 component pins.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 48 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBTLV/3B.The multiplexer ic provides 16 bits.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.A resistance of 2 is used to operate the signal switching.In this case, operating this signal switch at 85°C is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.IC BUS DRIVER is used for the logic of this chip.
74CBTLV16245PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV16245PAG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV16245PAG Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Memory system of computers
- Automatic health monitoring systems
- Audio transmission
- Decimal decoder
- Control unit of Central Processing unit (CPU)
- VGA
- Idle motor
- Arithmetic Logic Units
- Data transfer
