banner_page

74CBTLV1G125CRE4

5 Terminations2.3V~3.6V 5 Pin 74CBTLV1G125 Signal switch74CBTLV Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74CBTLV1G125CRE4
  • Package: 5-TSSOP, SC-70-5, SOT-353
  • Datasheet: PDF
  • Stock: 475
  • Description: 5 Terminations2.3V~3.6V 5 Pin 74CBTLV1G125 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Number of Pins 5
Weight 2.494758mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CBTLV
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
Type Bus Switch
Resistance 25Ohm
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.5V
Base Part Number 74CBTLV1G125
Pin Count 5
Number of Elements 1
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 2.3V
Number of Ports 2
Nominal Supply Current 10μA
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 10μA
Turn On Delay Time 5 ns
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Length 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

74CBTLV1G125CRE4 Overview


Due to the fact that it is provided in the 5-TSSOP, SC-70-5, SOT-353, digital switch allows the board to be compacted.The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Multiplexers from the 74CBTLV series can be used in a wide range of applications.Among its basic features are 5 terminations.In addition, it also has a base part number of 74CBTLV1G125, which can be used to find related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 5 is found on this turn signal switch.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.It is configured with 5 pins.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.In this signal multiplexer, there are 1 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.With a resistance of 0, it operates.This signal switching operates at a resistance of 25Ohm.In the mux switch configuration, there are 1 elements.

74CBTLV1G125CRE4 Features


Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single

74CBTLV1G125CRE4 Applications


There are a lot of Texas Instruments 74CBTLV1G125CRE4 Signal Switches / Multiplexers / Decoders applications.

  • Make full adder
  • D/A converters
  • Combinational circuit
  • Electronic circuits
  • Used to connect a single source to multiple destinations
  • Enabling different rows of memory depending on address in memory chips
  • Microprocessor memory systems
  • Idle motor
  • VGA
  • High-performance memory-decoding applications

Write a review

Note: HTML is not translated!
    Bad           Good