74CBTLV1G125CRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV1G125 |
| Pin Count | 5 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV1G125CRG4 Overview
Digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353 for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.It is designed with 5 terminations as part of its basic configuration.The base part number is 74CBTLV1G125, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 2.5V volts.This turn signal switch has 5 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.This multiplexer ic is configured with 5 pins.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.As a result, signal multiplexer provides 1 bits.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.There are no external influences on this multiplexer ic, so it consumes 10μA current.In accordance with TR, switches can be packaged.The resistance is 2.It operates with a resistance of 15Ohm.This turn signal switch's circuit uses 1 transmission channels.
74CBTLV1G125CRG4 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
74CBTLV1G125CRG4 Applications
There are a lot of Texas Instruments 74CBTLV1G125CRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- HD surveillance system
- Relay
- To select different devices in microprocessor output
- Analog to digital conversion
- Metal detectors
- Data transfer
- Microprocessor memory systems
- Microprocessor instruction decoding
- Medium scale TV wall
