74CBTLV1G125DBVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Bus Switch |
| Resistance | 25Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV1G125 |
| Pin Count | 5 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 1 |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV1G125DBVRE4 Overview
In order to conserve board space, digital switch is included in the SC-74A, SOT-753.Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.This configuration includes 5 terminations as part of its basic functionality.The base part number is 74CBTLV1G125, which can also be used to find its logic switch related parts.The multiplexer's system works with 2.5V voltage.A component pin count of 5 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.The board is configured with 5 pins.The mounting point is Surface Mount.The CBTLV/3B family includes the logic switch.Signal multiplexer provides 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.In accordance with TR, switches can be packaged.The resistance of the signal switching is 2.In terms of resistance, it has a value of 25Ohm.This turn signal switch's circuit is based on a circuit with 1 channels.
74CBTLV1G125DBVRE4 Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
74CBTLV1G125DBVRE4 Applications
There are a lot of Texas Instruments 74CBTLV1G125DBVRE4 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- RF-based home automation system
- Time division multiplexing system
- A/D converters
- Decimal decoder
- Data distribution
- Frequency multiplexing system
- Medium scale TV wall
- Night vision cameras
- To select different task for memory in microprocessor memory systems
