74CBTLV1G125DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 25Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV1G125 |
| Pin Count | 5 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV1G125DCKRG4 Overview
Due to the fact that it is provided in the 5-TSSOP, SC-70-5, SOT-353, digital switch allows the board to be compacted.Tape & Reel (TR) is the method used for packaging.Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.The basic configuration of this system includes 5 terminations.There is a base part number of 74CBTLV1G125 which can also be used in order to locate the logic switch that are related to this item.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 5 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 5 pins.The mounting point is Surface Mount.The logic switch object belongs to the family of CBTLV/3B.There are 1 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.The switches is packaged according to the way of TR.With a resistance of 0, it operates.The resistance of the signal switching is 25Ohm.In the turn signal switch's circuit, there are 1 channels used for transmission.
74CBTLV1G125DCKRG4 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
74CBTLV1G125DCKRG4 Applications
There are a lot of Texas Instruments 74CBTLV1G125DCKRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Metal detectors
- A robotic vehicle with the metal detector
- RF-based home automation system
- Idle motor
- Encrypted communications system
- Textile mills
- Recording transmission
- To select different devices in microprocessor output
- Enabling block of memory depending on address in memory chips
