74CBTLV1G125GN,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74CBTLV |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Bus Switch |
| Resistance | 38Ohm |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.3mm |
| Base Part Number | 74CBTLV1G125 |
| Pin Count | 6 |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 200μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 6.3 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.35mm |
| Width | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV1G125GN,132 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 6-XFDFN.Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTLV series can be used for a wide range of applications.It is designed with 6 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBTLV1G125 may also be used.The multiplexer is supplied with 3.3V voltage.In this turn signal switch, there are 6 component pins.As a type of supply, Single is employed.With 6 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In this signal multiplexer, there are 1 bits provided.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.Without any external influences, it consumes 200μA current of multiplexer ic at all times.2 ports are used for some other peripheral signal switchings to plug in.38Ohm is the resistance at which it operates.The configuration of the mux switch contains 1 elements.
74CBTLV1G125GN,132 Features
Supplied in the 6-XFDFN package
Adopting a supply type of Single
74CBTLV1G125GN,132 Applications
There are a lot of Nexperia USA Inc. 74CBTLV1G125GN,132 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Implementing boolean functions with multiple variables
- Microprocessor memory systems
- Automatic Monitoring systems
- Frequency multiplexing system
- Image transmission
- Data bus control
- Injectors
- Steel plants
- Transmission from the computer system of a satellite
